How to use it 01 Enter the final value — the total amount received, including anything already returned. 02 Enter the cost — the total amount put in. 03 Read the ROI percentage; the result card also reports the net gain in money. 04 Optionally use the second row to compound a present value at a rate for a number of years, and check that discounting the result returns the input.
Worked readouts 15,000 back from a 10,000 cost is a net gain of 5,000.00 and an ROI of 50.00% . The formula is symmetric below the cost: 8,000 back from 10,000 reads −20.00% , and exactly 10,000 back reads 0%. The second row is the time check: 10,000 at 8% for 10 years becomes 21,589.25 , and discounting that future value back at the same rate returns 10,000.00 — the same arithmetic the TVM registers use, shown without the registers.
Percent, period and risk ROI is (final − cost) / cost × 100: a ratio, so it compares projects of different sizes. It is also silent about time. A 50% ROI over ten years is an annual compound rate of about 4.1% ((1.5)^(1/10) − 1), while 50% in one year is 50%; only the horizon separates them, which is why the future-value row sits under the ROI calculation. The 10,000 → 21,589.25 example compounds at exactly 8% for ten years, and 21,589.25/10,000 − 1 = 115.89% is the total return over the whole period — the same investment described with and without time.
Limits and honest assumptions No horizon, no interim flows. The panel sees one final value and one cost. A project that returns cash early has a higher true rate than the total ROI suggests; put the dated flows through NPV / IRR instead.
Gross of everything. Taxes, fees, inflation and risk are not modelled, and a cost of zero cannot be divided, so the ROI card needs a positive cost.
What it does not do. It does not fetch market returns, adjust for risk, or compare against an alternative; the rate in the second row is an assumption you type. This page provides general information and scenario estimates based only on the inputs you provide. It is not investment, tax, legal, or other professional advice and does not recommend any rate, product, or institution.
Dividing by the wrong number The classic arithmetic slip is dividing the gain by the final value instead of the cost: 5,000/15,000 reads 33%, but the invested capital was 10,000 and the answer is 50%. The classic interpretation slip is comparing ROIs with different horizons — 20% over one year is not worse than 50% over five years. And a return can be positive while the decision was bad: an ROI of 3% on a risky project is below a savings rate, so always put the number next to a hurdle you would accept.
Where it is used Screening a project or a campaign Enter spend as the cost and the measured revenue or saving as the final value; the ROI percentage then ranks projects on the same scale, before the harder question of how long the money was tied up.
Checking whether time flatters a plan Use the second row to see the same money compounded: 10,000 at 8% for 10 years is 21,589.25, so a plan promising 22,000 in ten years is promising roughly an 8% annual compound return — with all the risk that the 8% assumption carries.
Privacy Everything you type, including the rate and horizon, is computed in your browser; nothing is uploaded.
References
Wikipedia, Return on investment , en.wikipedia.org (访问日期:2026-10-07)— the ratio, its variants and its limits.
Wikipedia, Compound annual growth rate , en.wikipedia.org (访问日期:2026-10-07)— annualising a total return.
Wikipedia, Time value of money , en.wikipedia.org (访问日期:2026-10-07)— future and present value.
OpenStax, Principles of Finance , openstax.org (访问日期:2026-10-07)— investment evaluation in practice.
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07