How to run a prediction 01 Paste a TLE. Two lines plus an optional name; the built-in set is the ISS, and a NORAD ID button fetches a fresh one from CelesTrak — the only network request the panel makes. 02 Set the observer. The location bar's latitude and longitude drive the look angles and passes. 03 Watch the epoch warning. If the element set is more than 30 days old the panel says so in amber; refresh before trusting a pass time. 04 Read the geometry cards. Sub-point, altitude, speed, elevation, azimuth, range, inclination, period and apogee/perigee. 05 Scan the pass table. Onset, maximum elevation and time, end, both azimuths and duration; export what you need.
Worked example The built-in ISS element set (NORAD 25544 , epoch 2024-01-23 13:57:24 UTC ) parsed and propagated by the engine:
Readout
Value
Inclination
51.6415°
Orbital period
92.93974 min (15.4939 rev/day)
Apogee / perigee
420.01 / 417.003 km
Eccentricity
0.000221
Sub-point at epoch + 10 min
29.5758°, −43.4543° at 418.105 km , 7.66513 km/s
Look from Beijing at epoch
elevation −69.2° , azimuth 5.96° , range 12377.6 km
The next pass over Beijing with a maximum elevation of at least 10°: onset 2024-01-24 04:01:39 UTC at azimuth 228.6° , peak 68.29° , end 04:12:30 UTC at azimuth 53.8° , duration 10.862 min . Four more passes follow inside 24 hours, peaking at 19.06° , 11.01° , 17.82° and 65.52° . The look geometry makes the table meaningful: at epoch the satellite is below the horizon at −69.2° and almost 12,378 km away; the pass begins when the elevation crosses the horizon and the 10° filter keeps only worthwhile events.
Reading a TLE, and where its accuracy comes from The two lines are a compressed orbit: the epoch and a drag term on line 1, and six mean elements on line 2 — inclination, right ascension of the ascending node, eccentricity, argument of perigee, mean anomaly and mean motion. Line 2 prints a mean motion of 15.49563249 revolutions per day; SGP4 first removes the Kozai correction before propagating, which brings it to 15.4939 rev/day — the period in disguise (1440/15.4939 = 92.93974 min ) — and the semi-major axis follows from it, giving the 420 / 417 km apogee and perigee once the WGS-84 equatorial radius is subtracted. SGP4 turns those mean elements into a state vector at any time, modelling the dominant perturbations — Earth's oblateness, drag through the B* term, and secular effects — while deliberately omitting things such as high-order gravity, solar radiation pressure and manoeuvres. At 51.64° inclination the ISS ground track never goes beyond ±51.64° latitude, which is why a station at Beijing at 39.9° N sees it well, and why low-inclination launches cannot be served by the same orbit.
Limits and what it does not do
The element set is perishable. SGP4 error grows with time from epoch, at roughly a kilometre per day for a low-orbit satellite under normal conditions and faster during high solar activity; the built-in ISS set is from January 2024, far beyond the panel's 30-day amber flag. Refresh it before planning anything.
Geometry, not visibility. The pass table says when the satellite is above 10° elevation, not whether it is sunlit or the sky dark; it also ignores terrain, buildings and local obstructions. What it does not do. It does not predict decay, collisions or manoeuvres, and it does not model optical brightness — for the Sun and Moon use the Sun panel and Moon panel , for time scales Time Scales , and for a two-body idealisation the Kepler tab .
The trap: a pass that never happens An element set is a snapshot; the epoch card and the amber warning are the most important pixels on the page. A stale ISS set can put the satellite tens of kilometres off after a month and minutes of error into a pass time after a few, and an outdated set can even invent or erase a pass near the 10° limit. The second trap is inclination: the ground track's highest latitude equals the inclination, so a 51.64° orbit passes directly overhead only within that band — the pass table's maximum elevation, not the distance, is what tells you how good a pass is.
Where it is used Planning an observation Pick the pass with the highest maximum elevation: 68.29° means the satellite crosses near the zenith, the best geometry for a photograph or a radio contact; the 11.01° pass is a horizon graze and may be blocked by a building.
Radio and education Amateur radio, weather-satellite downloads and classroom tracking all start from a TLE and a look-angle table; exporting the passes as a calendar file turns the prediction into reminders, and the ground track shows the orbit's shape for teaching.
Privacy Propagation and pass search run in your browser; the only network request is the CelesTrak fetch you trigger. Your observer coordinates stay on the device.
References
CelesTrak, NORAD Two-Line Element Set Format — the field layout. celestrak.org (访问日期:2026-10-07)
Vallado et al., Revisiting Spacetrack Report #3 — SGP4/SDP4 accuracy and limits. celestrak.org (访问日期:2026-10-07)
NASA, International Space Station facts and figures — about 90 minutes per orbit. nasa.gov (访问日期:2026-10-07)
Wikipedia, Two-line element set — epoch, drag and mean elements. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Simplified perturbations models — what SGP4 models and omits. en.wikipedia.org (访问日期:2026-10-07)
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07