How to run a case 01 Pick a preset. Drag-free 45° restores the defaults; Linear and Quadratic switch the drag model and coefficient. 02 Set the launch. Speed, angle, mass, g and launch height are sliders or typed values. 03 Choose drag. None, linear (−b·v, b in N·s/m) or quadratic (−c·|v|·v, c in N·s²/m²). 04 Read the cards. Range is the accent value; with drag on, the last rows compare against the drag-free run. 05 Reuse the run. Play or scrub, compare integrators, or send the path as a table.
Worked example Mass 1 kg, g 9.80665 m/s², launched from the ground at 30 m/s and 45°:
Readout
Drag-free
Linear drag, b = 0.25
Range
91.7745 m
51.6161 m (−43.8%)
Maximum height
22.9436 m
17.0233 m
Flight time
4.32629 s
3.74905 s
Impact speed · angle
30.0 m/s · −45.0°
17.633 m/s · −61.9°
Apex time
2.16314 s
1.72917 s
Terminal speed
—
39.2266 m/s
Energy lost at impact
—
65.45%
The drag-free row also prints the closed-form range and a relative deviation of 2.63e-15 — the integrator's residual.
What drag changes Linear drag removes speed in proportion to velocity: horizontal motion decays exponentially while vertical motion approaches the terminal speed mg/b = 39.2266 m/s , which this launch never reaches. The parabola turns asymmetric — the apex arrives at 1.729 s but the flight lasts 3.749 s — and the projectile lands at −61.9° , much steeper than it left. The energy card accounts for the rest: 65.45% of the initial mechanical energy is gone by impact.
Limits and what it does not do
The closed-form range has a condition. R = v₀²sin(2θ)/g assumes a return to launch height; with h₀ above ground the analytic row uses the general solution.
Two simple drag laws only. The coefficient is constant: no air density, altitude, wind, Reynolds number, Magnus or spin effect. What it does not do. It produces no uncertainty budget or control loop; add error bars in Uncertainty , compare the pendulum for a second model, and take feedback work to the Engineering Lab .
The trap: terminal speed is not impact speed The linear-drag run reports a terminal speed of 39.2266 m/s and an impact speed of 17.633 m/s , and the gap surprises people: terminal speed is the limit a long vertical fall would approach, not a speed this short flight attains. Read it as a property of the drag coefficient. The same run cuts range from 91.7745 m to 51.6161 m — 43.8% — while maximum height drops only 25.8% , so drag flattens the arc as much as it shortens it.
Where it is used Sport and ballistics Compare a 30 m/s kick or throw with and without drag to see how much range the air takes; the impact angle shows how steeply the ball arrives.
Teaching the vacuum approximation The two rows sit side by side: the drag-free parabola is the textbook case, and the drag row shows where the textbook stops being useful.
Privacy The simulation runs entirely in your browser; no launch parameters, trajectories or results are uploaded.
References
Wikipedia, Projectile motion — the drag-free range and its assumptions. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Drag (physics) — linear and quadratic drag, terminal velocity. en.wikipedia.org (访问日期:2026-10-07)
NASA Glenn Research Center, Terminal Velocity — weight and drag balance. grc.nasa.gov (访问日期:2026-10-07)
NIST Special Publication 811, Appendix B.8 — standard gravity 9.806 65 m/s². nist.gov (访问日期:2026-10-07)
Wikipedia, Equations of motion — the initial-value problem. en.wikipedia.org (访问日期:2026-10-07)
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07