How to use it 01 Choose the topology. Series computes Z = R + jωL + 1/(jωC); parallel computes admittance first and inverts it. 02 Enter the components. R in Ω, L in mH, C in µF, f in Hz; a zero omits that component. 03 Read the impedance cards. Z, |Z| and ∠Z describe the network at your frequency. 04 Read the resonance cards. f₀, Q and bandwidth appear when L and C are non-zero. 05 Watch the sweep. The log-frequency curve rises or falls into resonance with f₀ marked.
Worked example R 50 Ω, L 10 mH, C 1 µF, in both topologies:
Readout
Series
Parallel
f₀
1591.55 Hz
1591.55 Hz
Q
2.0000
0.5000
Bandwidth
795.77 Hz
3183.10 Hz
Z at f₀
50 + j0 Ω (
Z
Z at 1000 Hz
50 − j96.3231 Ω ·
Z
Z at 5000 Hz
50 + j282.3283 Ω ·
Z
The sweep confirms the shape: the series curve bottoms at 50 Ω at f₀ while the parallel curve peaks at the same frequency.
The same f₀, opposite Q Resonance is set by the components alone — ω₀ = 1/√(LC) — so both share 1591.55 Hz . Damping is set by topology and R: series Q = √(L/C)/R = 2.0000 , parallel Q = R/√(L/C) = 0.5000 . Q = 0.5 means ζ = 1/(2Q) = 1 , exactly critical damping, so the parallel network sits on the boundary while the series one rings. Bandwidth is f₀/Q: 795.78 Hz series, 3183.10 Hz parallel.
Limits and what it does not do
Ideal components, one frequency at a time. No ESR, core loss, lead inductance or temperature dependence; entering 0 removes the component.
Q needs both reactive parts: if L or C is zero the resonance cards disappear.
The resonance card is not enough At f₀ both networks read the same 50 + j0 Ω , so the resonance card alone cannot tell them apart. The difference is the shape around it: at 1 kHz the series climbs to 108.53 Ω while the parallel falls to 45.05 Ω ; at 5 kHz the series reads 286.72 Ω against the parallel 28.90 Ω . Read the sweep: a minimum marks series, a maximum parallel.
Where it is used Filter and matching work Q sets the selectivity: the series network's 795.78 Hz bandwidth suits a narrow band-pass; the parallel network's 3183.10 Hz is far too wide for the same job.
Checking a resonant tank Enter the measured L and C and compare f₀ with where the sweep bottoms or peaks; a mismatch points at a component value.
Privacy The calculation and sweep run in your browser; nothing is uploaded.
References
Wikipedia, RLC circuit — series and parallel resonance and the two damping definitions. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Q factor — quality factor, bandwidth and Q = f₀/Δf. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Damping ratio — ζ = 1/(2Q) and the damping regimes. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Electrical impedance — complex impedance, magnitude and phase. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, LC circuit — the undamped resonant frequency. en.wikipedia.org (访问日期:2026-10-07)
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07