How to read it 01 Start the analyser. Press the microphone button and allow access; the panel opens at FFT 8192. 02 Choose an FFT size. Larger sizes give a finer Δf; smaller sizes react faster. 03 Read the header. It shows the sample rate and Δf. 04 Watch the peak card and spectrogram. The card refines the strongest bin; the spectrogram scrolls it over time, newest column on the right. 05 Capture or pause. Snapshot sends the frame to the workspace.
Worked examples A 440 Hz tone at half scale, analysed at 48 kHz:
FFT
Δf
Frame length
Coarse bin peak
Interpolated peak card
2048
23.44 Hz
42.7 ms
445.31 Hz (+20.8¢ )
—
4096
11.72 Hz
85.3 ms
445.31 Hz (+20.8¢ )
439.92 Hz (A4 −0.3¢)
8192
5.86 Hz
170.7 ms
439.45 Hz (−2.15¢ )
—
16384
2.93 Hz
341.3 ms
439.45 Hz (−2.15¢ )
—
At 44.1 kHz the same sizes step by 21.53 Hz (FFT 2048) and 5.38 Hz (FFT 8192).
Resolution is a grid, not an answer The FFT returns N/2 + 1 values spaced by Δf = sample rate / N, each covering a band around its grid frequency. The peak card does not stop at the grid: it fits a parabola through the strongest bin and its neighbours, which is how a 440 Hz tone in a 4096-point frame reads 439.92 Hz instead of the nearest grid point of 445.31 Hz . The trade is time: the frame spans N / sample rate seconds, so the finest step of 2.93 Hz averages 341 ms of sound and smears fast transients.
Limits and what it does not do
One channel, live only. No calibration, no averaging controls, no WAV or CSV export; the plot floor sits at −100 dB and the peak search ignores anything below about −110 dB.
A tone between bins loses amplitude: leakage spreads it across neighbouring bins, so the coarse bin reads low even when the frequency is close. What it does not do. It does not record audio or produce a measurement report; for pitch tracking use the Tuner or SPL meter , and for offline analysis Signal Processing .
The bin that is not your tone At 48 kHz with FFT 4096 the grid is 11.72 Hz wide and 440 Hz falls between two points: the nearest bin is 445.31 Hz , a 20.8-cent error at A4 — a slightly sharp note. The peak card interpolates to 439.92 Hz , 0.3 cents flat, and FFT 8192 moves the nearest bin to 439.45 Hz (−2.15¢ ). Read the peak card for frequency and the shape for content; never read a pitch off the grid.
Where it is used Rooms and speakers Play pink noise or a slow sweep: standing waves show as steady horizontal bands while a speaker's roll-off appears as a fading top end.
Instruments and practice The spectrum shows which harmonics a note carries; switch to the Tuner for the fundamental alone, and capture a frame to compare two takes.
Privacy Microphone audio is analysed in your browser in real time and never uploaded; captured frames stay in the local workspace.
References
Wikipedia, Discrete Fourier transform — the Δf = sample rate / FFT size grid. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, Spectral leakage — tones between grid points. en.wikipedia.org (访问日期:2026-10-07)
MDN Web Docs, AnalyserNode.fftSize — FFT sizes 32–32768. developer.mozilla.org (访问日期:2026-10-07)
Wikipedia, Spectrogram — time, frequency and level. en.wikipedia.org (访问日期:2026-10-07)
Wikipedia, A440 (pitch standard) — the 440 Hz reference. en.wikipedia.org (访问日期:2026-10-07)
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07