How to use it 01 Measure the room — perimeter, wall height and the sum of openings — and decide whether the ceiling joins the same color. 02 Set the coverage rate. Data sheets quote a spread rate per litre for one coat; a typical roller value for walls is 10–12 m² per litre per coat, and primer covers more. 03 Set coats, can size and waste. Two topcoats are the usual roller figure; 5% waste covers roller loss and touch-ups. 04 Read the two accent cards. Litres with waste is what the color needs; cans to buy is that figure rounded up to whole cans, with spare litres shown separately.
Worked readouts A room with 16.5 m of wall perimeter, 2.5 m wall height, 4.2 m² of openings and a 12 m² ceiling, painted in two coats at 12 m² per litre per coat, 5 L cans, 5% waste:
Card
The panel reads
Net wall area
37.05 m² (41.25 m² gross − 4.2 m² openings)
Paintable area incl. ceiling
49.05 m²
Total painted area
98.1 m² (two coats)
Paint needed
8.175 L
Incl. waste
8.5837 L
Cans to buy
2 cans
Leftover
1.4163 L
Two comparisons from the same room: dropping coverage to 10 m² per litre per coat raises the order to 10.3 L and 3 cans ; a third coat at 12 raises it to 12.876 L , also 3 cans .
Coverage is per litre, per coat The total painted area is net wall area plus any extra area, times the number of coats — the panel multiplies coats before dividing by coverage, so "10 m² per litre" never silently becomes a two-coat figure. Waste scales the litres, cans round up, and the leftover card is whole cans minus litres needed. Primer is a separate line with its own, usually higher, spread rate.
Assumptions and limits
One smoothness class per number. The coverage input is a single figure, so a room mixing bare plaster, filler patches and previously painted walls needs the lowest realistic rate — or a per-surface calculation. Surface preparation, primer, tape and trays are outside the count. What it does not do: it does not measure a room, choose a product or check a datasheet, and it does not estimate adjacent materials. For tile, wallpaper or floor quantities use the other panels ; for area-unit conversions use the area converter .
The waste that flips a can The can count is a ceiling function, so waste decides the last can. A room needing 9.6 L before waste stays at 2 cans of 5 L; with 5% waste it needs 10.08 L and jumps to 3 cans . The same step happens when coverage drops from 12 to 10 or a third coat is added. Compare the litres-with-waste card, not the exact litres, against what is on the shelf.
Where it helps Repainting one room, ceiling included Measure the perimeter once, subtract the openings, and if the ceiling is the same color add its area to the extra field. The painted-area card then covers walls and ceiling together, and the leftover figure tells you whether the last can is mostly spare.
Checking a quote before buying A painter quotes "about ten litres" for a room; the panel separates 8.175 L of genuine demand from 8.5837 L with waste, keeping the discussion on one basis.
Privacy Room measurements and estimates are computed in your browser; nothing is uploaded and the shopping list is only produced when you choose to copy it.
References
Wikipedia, Paint , en.wikipedia.org (访问日期:2026-10-07)— binder, pigment and solvent, and the note that roller work generally needs two coats for even color.
Wikipedia, Primer (paint) , en.wikipedia.org (访问日期:2026-10-07)— why priming is a separate preparatory coat with its own absorption and coverage.
Dulux, Paint Calculator , dulux.com.au (访问日期:2026-10-07)— surface area ÷ coverage per litre × number of coats, the two-coat topcoat assumption, and typical spread rates.
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07