How to use it 01 Measure the perimeter and the height. Perimeter is the sum of the wall runs; height is floor to ceiling plus a little, since strips run full height. 02 Copy the roll size from the label. The default 0.53 m × 10.05 m is the common European roll; wide and long rolls exist and the field accepts both. 03 Enter the pattern repeat. It is printed on the label, usually in centimetres. Zero means a plain or random-match paper. 04 Keep the trim allowance. 0.10 m per strip covers cutting at the ceiling and skirting; patterned paper needs the whole-repeat rule on top. 05 Read strips before rolls. The strips-needed and strips-per-roll cards explain the roll count; the warning line repeats the half-drop caveat when a repeat is set.
Worked readouts A room with 18 m of wall, 3.2 m ceilings, a 0.53 m × 10.05 m roll and 0.10 m trim:
Card
Plain paper
0.64 m repeat
Cut length per strip
3.3 m
3.84 m
Pattern waste per strip
0
0.54 m
Strips needed
34
34
Strips per roll
3
2
Rolls to order
12
17
The strips needed never change — the room's width is the room's width. The rolls change because of one line: 10.05 ÷ 3.3 = 3.05 strips per roll, but 10.05 ÷ 3.84 = 2.61, which floors to 2 .
Cutting to whole repeats A strip with a pattern must start at the same point in the design as its neighbours, so its length is rounded up to a whole number of repeats: the engine computes ceil((height + trim) ÷ repeat) × repeat. Here ceil(3.3 ÷ 0.64) = 6 repeats, so the strip is 6 × 0.64 = 3.84 m , and every strip throws away 0.54 m before it is even hung. The number of strips is ceil(perimeter ÷ roll width) = ceil(18 ÷ 0.53) = 34 . The rolls are then ceil(strips ÷ strips-per-roll).
The critical detail is that the last step is a floor followed by a ceiling, so the result moves in cliffs , not percentages. A small repeat often changes nothing: at 2.6 m walls the plain strip is 2.7 m and a 0.64 m repeat still leaves 3 strips per roll, so the same room stays at 12 rolls. A larger repeat, or a taller wall, pushes the strip past the 3.35 m break-even where a roll yields only two strips — and five extra rolls appear at once.
Assumptions and limits
Ordinary openings are not deducted. Offcuts above a door are rarely reusable, so the convention is to paper past openings and trim around them; only full-height glass or cabinetry justifies the deducted-width field.
One straight-match repeat per room. The engine rounds strips to whole repeats but does not model half-drop (offset) matching, which typically needs about another half repeat per strip; the panel warns to add it. What it does not do: it does not estimate paste, lining paper or tools, and it does not know your roll's actual batch. For painted walls use the Paint panel ; for floors use the Tile panel or the Brick panel for masonry.
The repeat is a cliff, not a percentage Most wallpaper guides say "add 10 % for a small repeat, 15–20 % for a large one", and that is a reasonable shopping rule. It hides what the panel makes visible: the extra paper does not scale smoothly, because it is quantised by how many full strips fit on a roll. At 3.2 m walls the 0.64 m repeat raises the paper needed from 34 × 3.3 = 112.2 m of strip to 34 × 3.84 = 130.6 m — about 16 %, in line with the guides — but the roll order jumps from 12 to 17, because the longer 3.84 m cut drops each 10.05 m roll from three strips to two (10.05 ÷ 3.84 = 2.61, floored). Two more traps sit in the same card. Buying exactly the roll count leaves nothing for a damaged strip or a future repair, and rolls from different batches can differ in shade; keep the spare from the same batch. And a "random match" paper genuinely needs repeat 0 — entering a repeat that is not printed on the label only adds waste.
Where it helps A feature wall with a large motif Measure the wall's run as the perimeter, set the repeat from the label, and read the strips-per-roll card before ordering. Large-motif papers are exactly where a flat percentage estimate comes up short.
Checking a decorator's order A decorator quotes 14 rolls for the room; the panel shows 12 plain or 17 with the repeat the label states, so the conversation has one basis: the strips and the cut length.
Privacy Room dimensions and estimates are computed in your browser; nothing is uploaded and the shopping list appears only when you copy it.
References
Wikipedia, Wallpaper , en.wikipedia.org (访问日期:2026-10-07)— straight-match and half-drop repeats and the standard roll formats.
John Lewis & Partners, Wallpaper buying guide , johnlewis.com (访问日期:2026-10-07)— 10.05 m × 53 cm standard rolls, the drops-per-roll method and repeat-based waste guidance.
Victoria and Albert Museum, Wallpaper collection , vam.ac.uk (访问日期:2026-10-07)— the history of repeat-printed wallpaper as a designed surface.
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07