How to use it 01 Measure the surface in square metres. For a simple room that is length × width; an L-shaped floor is best split into rectangles and summed. 02 Enter the tile and the joint. A 600 × 600 mm tile with a 2 mm joint occupies 0.602 × 0.602 m on the floor, not 0.6 × 0.6. 03 Choose waste by layout. 5 % suits a straight lay; 45° diagonal, herringbone or a room full of cuts sits in the 10–15 % band. 04 Add the pieces per box if the box label shows it; the panel then reports boxes as well as pieces. 05 Compare pieces and boxes before ordering. They round at different steps, and the last box is where the surprise lives.
Worked readouts 20 m² of floor in 600 × 600 mm tiles, 2 mm joints, 5 % waste, 4 pieces per box:
Card
The panel reads
Tile area
0.36 m²
Module incl. joint
0.362404 m²
Exact pieces
55.187
Pieces to buy
58
Boxes
15 (coverage per box 1.44 m² )
Two variants from the same 20 m²: with no joint counted, the order becomes 59 pieces and still 15 boxes; laying diagonally with 15 % waste takes it to 64 pieces and 16 boxes.
The joint changes the module, the waste changes the order The engine's module is (length + joint) × (width + joint). For a 600 mm tile with a 2 mm joint that is 0.602 × 0.602 = 0.362404 m² instead of 0.36 m² — a 0.67 % larger footprint, so 20 m² needs 55.19 tiles rather than 55.56. The effect is small per tile and grows with the joint; the panel is deliberately conservative when the joint is left at zero, because ignoring the joint over-counts pieces slightly.
Waste is the second factor, and it applies before rounding: 55.187 × 1.05 = 57.95, which rounds to 58 . That order is then rounded again to boxes: 58 ÷ 4 = 14.5, so 15 boxes. Both roundings are real purchasing steps — you buy whole pieces and whole boxes — and the engine never rounds down at either step.
Assumptions and limits
Area is a number you supply. The panel does not read a floor plan, so alcoves, columns and doorways are your job to measure; a rectangular estimate on an irregular room is the most common source of error.
Waste is a flat percentage, not a layout model. It does not know how many full tiles fit across the room, so it cannot predict the offcut pattern or the last row. What it does not do: it does not estimate adhesive, grout, levelling clips or underlay. For wall finishes use the Paint panel or the Wallpaper panel ; for the wall structure itself use the Brick panel .
Diagonal laying is a different order The 5 % default is a straight-lay figure. Switch to 45° and the waste band becomes 10–15 %: at 15 % the same floor needs 64 pieces and 16 boxes instead of 58 and 15 — one extra box for the same area. The trap is that diagonal cuts produce two usable offcuts from some tiles and none from others, so the percentage is a planning allowance, not a guarantee. A second trap is buying to the exact count: tiles from a later production batch can differ slightly in calibre and shade, and a broken tile mid-job is impossible to match. Most tilers keep a couple of spare pieces from the same batch.
Where it helps A bathroom floor before the first trip to the shop Measure, enter the format on the box, and take the pieces and boxes to the store in one visit — including the spare allowance.
Checking a quote A fitter quotes "about 60 tiles" for the 20 m² floor. The panel separates 55.19 of genuine demand from 58 with waste, so the conversation happens on one basis.
Privacy Room areas and estimates are computed in your browser; nothing is uploaded and the shopping list appears only when you copy it.
References
Wikipedia, Tile , en.wikipedia.org (访问日期:2026-10-07)— ceramic tile formats and their use as floor and wall covering.
Wikipedia, Grout , en.wikipedia.org (访问日期:2026-10-07)— the joint filler whose width adds to each tile's effective footprint.
Wikipedia, Thinset , en.wikipedia.org (访问日期:2026-10-07)— the thin-bed adhesive layer under modern tile installations.
Calculators in this hub
Hand-picked tools, one click away. The mini versions compute live and carry your values into the full calculator.
Sources & review
Reviewed by CalcX Editorial Team
Updated 2026-10-07